沧州华贸承机床附件制造有限公司
联系人:范经理
售服电话:400-883-6671
手机:13463728023
电话:0317-6343268
传真:0317-6343936
Email:huamao00111@126.com
地址:河北省盐山县范堂工业园幸福路161号
1, according to the working conditions to choose the special coating surface material
2, each fold surface has solid PVC sheet support
3, special sliding vane can avoid noise at high speed
4, high frequency welding.
5, connection plate fixation.
At the design stage to estimate the compression of the welding type shield length, refer to the following parameters:
Standard folding surface has the following height: 15 mm, 20 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm.
In total clearance between guide and shield must be minimum of 5 mm, up to 10 mm.
A fold the unfold size is equal to 2 times the height of folding surface minus 10 mm.
A compressed fold thickness below the average of 4 mm.
The compression of shield length is equal to:
Lmin Lmax = maximum elongation length = minimum compression length
ST = maximum formation - minimum stroke = work schedule
H = plait scene height W = width of shield
A = external height
上一条: 螺旋钢带高护套
下一条: 柔性风琴式机床导轨防护罩(皮老虎)